View Single Post
Old 08-17-2010, 07:01 PM   #45 (permalink)
Rob@BerkTech
Base Member
 
Join Date: Aug 2010
Location: Santa Ana, CA
Posts: 63
Drives: 2010 370Z
Rep Power: 15
Rob@BerkTech is on a distinguished road
Default

Quote:
Originally Posted by Dembflyr View Post
I crawled under the car and found that the left resonator pipe's hanger was not in the rubber mount. I figured that I must have knocked it out while doing the install. So loosened the bolts and realigned the pipes making sure that the hangers were all in place. Everything looked good except...
What I noticed is that the hangers don't seem long enough. They are barely in the mount on the left side and the right side doesn't look right either.
Long story short, I just looked at the tips after running some errands and sure enough the left one is down again.
I looked under the car and the hanger is out of the mount again.
I might have to modify the mount.
Hey,

We are getting a couple reports of this - in fact we just had a customer bring up their car for us to take a look. Our first recommendation is loosening the bolts and twisting the pipes to get it all lined up. If that doesn't work, you can do a washer or two on the hanger mount.

We're not sure why this issue is coming up with only certain 370Zs and not others, but we're taking a look on other cars to figure out what we need to tweak. But please let us know if you can't get it right and we'll figure out a solution for you.
Rob@BerkTech is offline   Reply With Quote