The problem is that the adjuster (for lack of a better term) rod comes loose from the seat frame in the front corner nearest the shifter. Nissan just used one of the one way push on washers that is supposed to "lock" onto the adjuster shaft. Well it does not work well.
What I had to do on the 350Z was take the seat out. Push on the shaft just a little bit and drill a hole through it. I then put a cotter pin through the hole. Never had the problem again, and my car saw some very aggressive driving on the AutoX course.
__________________
Powertrain Warranty voided on 5/14/2011
Mod List:GTM Supercharger,SmartTop module, Oil Cooler, GT-R Start button, Nismo Exhaust, BC Racing ER Coilovers, Backup Camara
For eastwest:
|