View Single Post
Old 07-23-2010, 06:34 PM   #54 (permalink)
WarmAndSCSI
A True Z Fanatic
 
WarmAndSCSI's Avatar
 
Join Date: May 2010
Location: SLC, UT
Posts: 1,671
Drives: '08 Evo X | '10 370Z
Rep Power: 18
WarmAndSCSI is a splendid one to beholdWarmAndSCSI is a splendid one to beholdWarmAndSCSI is a splendid one to beholdWarmAndSCSI is a splendid one to beholdWarmAndSCSI is a splendid one to beholdWarmAndSCSI is a splendid one to behold
Default

Quote:
Originally Posted by Jordo! View Post
How much is a lot? Would the mean wear still not be meaningful? But, even if so, for each given oil, there were as few as 1 sample and no more than 6 samples, so your point is very well taken...

Interestingly enough, some of the better performing oils from the averaged wear data in the oil nerd's thread included Castrol syntec (in both 0W30 and 5w30), Penzoil Platinum (not ultra -- can't recall if that was even tested), and Quaker Q state.

You gave two of those the nod, what are your thoughts on the Quaker state oil?

Oh, and where can you get the German Castrol?
Mean wear is definitely useful; but most people tend to focus on the outliers (results from cars that are beat the hell out of, cars that are babied beyond all reason), which is just illogical.

Castrol Syntec is excellent stuff - 0W-30 is unbeatable for the price (~$7/qt). Pennzoil Platinum is a favorite of many and its real-world performance and specs on paper back it up - it's as good as Mobil 1 but generally cheaper.

Pennzoil and Quaker State are basically made from the same stock now since Shell owns them both. Shell Rotella, Pennzoil, Quaker State - all good synthetics, all made by Shell's SOPUS group.

I've never used Pennzoil Platinum, and never paid attention to when I used Quaker State Q or Horsepower of whatever the hell it was/is called.

You can pick up German Castrol at Auto Zone. It's been separate from the other Castrol oil every place I've been, and they usually have 5-10 quarts in stock. Make sure it says European Formula on the front and Made in Germany, only for sale in the Americas on the back. There are some unknown batches of US-made 0W-30 (circa 2002) still floating around, and those are to be avoided since they may very well be Group III-based and heavily packed with friction modifiers (much like some other cheaper 0W oils).

Mobil 1 0W-40 is also tip-top oil and can be used with our engines since it's essentially the same viscosity at every single temperature as Castrol Syntec 0W-30 is. Castrol 0W-30 is a "thick" 30 wt whereas Mobil 1 0W-40 is a "thin" 40 wt. They're roughly equals.

I'm digging German Castrol on the Z so far - dropped oil temperature 5-10 degrees from the stock average cruising temperature. Idle noise is the same as well, if not quieter.
__________________

'10 PW 370Z 7AT - wife's car - Project Raspberry Cheesecake
'08 Evo X - built motor+trans | BB-X @ 32 psi | CH3OH | self-built+tuned - ??? WHP
'01 Galant V6 - built motor | GT35R | self-built+tuned - 550+ WHP (retired)

Last edited by WarmAndSCSI; 07-23-2010 at 06:37 PM.
WarmAndSCSI is offline