Nissan 370Z Forum - View Single Post - Atlanta Area: July 24-25 Meet

'10Anamoly · 07-20-2010, 01:40 PM

Add me to the list of cars getting worked on. Have a somewhat unique exhaust setup going on (aka not sure if anyone else has done it before). I wanted to keep a similar to stock exhaust note but free up some of the restrictions so it will be:

Fast Intentions 304 Stainless 2.5" X-Pipe going all the way back to the OEM muffler inlets. Stock rear muffler and tips with dual resonators and the OEM muffler. Depending on volume, HFCs are probably next and then I will be done. I hate the stock y-juncture on the OEM exhaust and the tiny piping for the Y-pipe so I figured it would be good to wipe it all in one fell swoop. The muffler is probably a bit restrictive but I doubt it accounts for near as much loss as that y-pipe and junction. I know the y-pipe necks down to 1.75" in several parts.

07-20-2010, 01:40 PM	#78 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 16	Add me to the list of cars getting worked on. Have a somewhat unique exhaust setup going on (aka not sure if anyone else has done it before). I wanted to keep a similar to stock exhaust note but free up some of the restrictions so it will be: Fast Intentions 304 Stainless 2.5" X-Pipe going all the way back to the OEM muffler inlets. Stock rear muffler and tips with dual resonators and the OEM muffler. Depending on volume, HFCs are probably next and then I will be done. I hate the stock y-juncture on the OEM exhaust and the tiny piping for the Y-pipe so I figured it would be good to wipe it all in one fell swoop. The muffler is probably a bit restrictive but I doubt it accounts for near as much loss as that y-pipe and junction. I know the y-pipe necks down to 1.75" in several parts. __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd Last edited by '10Anamoly; 07-20-2010 at 01:42 PM.