It says for the etunes that they require two 0-60 pulls and one city/hwy cruising log. I used the performance logging feature for the 0-60 runs, this will start logging data as soon as the car starts moving and stop when you reach the target speed. (I did many runs, and just sent two of the better ones with decent launches)
This was the first time I had done any full throttle burns from a stop, and I found out launching the car was harder than I had expected. None of the 0-60's I did were amazing but hopefully the ones I sent will suffice.
On another note, I'm still not sure how they tested this car 0-60 at 4.7s as the program recorded my best run at 6.0s. (Granted this was my first time doing these pulls, and I had some trouble getting into second gear at redline, after a couple missed shifts and some gear grinding I started shifting to second at around 6800 and it seemed to go into gear a lot easier.) I'm sure the B&M SS is helping a bit, but I think the stock clutch is definately gonna go as soon as there is a good replacement solution out there.
For my cruising log, I just started the logging and drove around town for about 5 mins. They do give a list of parameters that must be included in the data log so I just made sure I had those all selected.
|