Quote:
Originally Posted by RomRox
I dont recommend the shampoo with water as lubricant. Tried it and left swirls. Tried it with detail spray... no swirls! I've learned my lesson!
.. and i agree with azn370. buy a porter cable, much easier to remove swirls once you have your technique down.
|
I've (and with me many others) had no issues doing this....
Make sure you mix in enough shampoo in your spray bottle and use the right shampoo (I use Z7) and finally make sure you lubricate the surface enough.
Quote:
Originally Posted by Forrest
I dont believe Z-aio will remove any swirls.
I dont believe z5 will truely hide it. Z5 in my opinion doesnt work like its supposed to and is hard to remove after putting on.
I think you would be better off porter cable and useing z-2.
|
Z-AIO has got light abrasives, agreed that they are light, but he also said he had very light swirls...
Z2 has no abrasives at all, so even with a PC, that's not going to do much good. Maybe you meant Z-PC
If you have a hard time removing Z5, you're putting it on too thick.
As when applies correctly it's very easy to wipe off.
Quote:
Originally Posted by eagle55
thanks for the suggestions guys, i picked up the zaio and i'm going to try out the full zaino routine. If i'm not happy with the result i'll go pickup a PC and give it a whirl. 
should zaio be the applied like z-2, as little as possible and using little arm pressure on the applicator? |
Basically yes, I just wouldn't use any ZFX, it dries pretty quick without it...