junior_jam

Just replaced my bulbs. A few tips:

1. You do not need to remove the wheels. Lift the car with the jack that came with the car until the front tire slightly comes off the ground. Turn the wheel to the opposite side that you are working on (if you're working on the left side, turn the wheels to the right). You'll have plenty of room to get the job done.

2. After removing the three clips that the OP mentioned, the light grey cap that covers the bulb housing twists and then comes out easily. Do not pry it off.

3. Take some time looking at the metal clips that hold the bulb in place. Here's instructions on how to get the clips off:

Move the outside clip finger holder thingy (the one toward the exterior of the car body) toward the front of the car and then toward the ground. There's a notch where the clip will come loose and then release toward the back of the car. The clip needs to be removed from the clip housing completely.

4. Keep the big notch of the bulb at 12 o'clock when you put the new bulb in. Be patient and don't be forceful. Once you line up the notch in the bulb housing with the bulb notch, it will snap into place.