Nissan 370Z Forum - View Single Post

Lee123 · 06-29-2010, 09:22 PM

I bought this new and had it installed on my car for a little over 2 weeks. It rattled against the crossmember and after a couple trips back to the shop to try to correct it I bought a different CBE. Others have had no trouble with these, I don't know why I did. Excuse the Invidia bags. I didn't want to get my car dirty bringing this home and it was hot in the garage, so I only unwrapped the muffler. If you want pictures of the other parts without the bags, let me know. **** SOLD ****

NOTE: I just got a PM asking if all the small parts were there so I checked the small parts bag and the threads are dicked up on 2 or 3 of the bolts. Looks like standard hardware store parts would work. As for the gaskets, the two at the muffler are stuck to the muffler, the two at the cat end are in the bag, and the one big one at the rear end of the Y pipe is missing. I'm glad he asked. Since the installer was so careful packing everything up I figured the bolts would be OK. The big gasket probably ripped when he took it apart.

06-29-2010, 09:22 PM	#1 (permalink)
Lee123 Base Member Join Date: Apr 2010 Location: Phoenix Posts: 84 Drives: 2010 370Z Roadster Rep Power: 15	Stillen CBE for sale in Arizona **SOLD I bought this new and had it installed on my car for a little over 2 weeks. It rattled against the crossmember and after a couple trips back to the shop to try to correct it I bought a different CBE. Others have had no trouble with these, I don't know why I did. Excuse the Invidia bags. I didn't want to get my car dirty bringing this home and it was hot in the garage, so I only unwrapped the muffler. If you want pictures of the other parts without the bags, let me know. SOLD ** NOTE: I just got a PM asking if all the small parts were there so I checked the small parts bag and the threads are dicked up on 2 or 3 of the bolts. Looks like standard hardware store parts would work. As for the gaskets, the two at the muffler are stuck to the muffler, the two at the cat end are in the bag, and the one big one at the rear end of the Y pipe is missing. I'm glad he asked. Since the installer was so careful packing everything up I figured the bolts would be OK. The big gasket probably ripped when he took it apart. Last edited by Lee123; 06-30-2010 at 10:34 PM.