Quote:
Originally Posted by rhood
Hey men, just a quick question for you, What all do you take off to get to the start button? I pulled off the surrounding area (the vents and around the Navigation). I cant seem to get it all the way off at the bottom where it seems to attach to the gear stifet finisher. I just dont want to pull so hard and break it. Any help would be helpful, Thanks
|
Check Triple's DIY and download the service manual, For reference. It sounds like you didn't remove the shifter cover. In case of the manual trans you just pul the ring on the base of the shifter suround up and towards you to take it off. Move it out of the way ( but not completely off) then you can get to the Phillips head screws that keep the 2 "knee pads" in place, the once to the left and right of the centre console. Once those are gone you'll see 2 Phillips head screws on the bottom end of the Nav/stereo/airco suround. Take those out and you can pull the whole suround off. Or at least pull it out far enough to reach the start button.