Thread: Any harm to putting washers under the crossmember?
View Single Post
Old 06-24-2010, 01:49 PM   #2 (permalink)
Daishi
Track Member
 
Daishi's Avatar
 
Join Date: Jul 2009
Location: NJ
Posts: 683
Drives: 09 370z 6Speed
Rep Power: 17
Daishi is on a distinguished road
Send a message via AIM to Daishi
Default
Quote:
Originally Posted by Lee123 View Post
Is there any harm to putting two washers (about 3/16" total thickness) under the crossmember at each of the 4 bolts? That is the only way to get enough clearance to stop my Stillen CBE from rattling. I've found a couple of posts saying it is a bad idea but I want to be as sure as possible because I'm happy with the Stillen other than this and don't want to replace it if it's OK to just leave the washers there.
I dont see a problem with it.. the 350 guys do it..
__________________
Cobb Tuned | Injen Intakes | Fast Intentions Long Tube Headers | Fast Intentions TDX Catback 18" Resonators CF Mufflers | Tommy Kaira Hebi Bebi Shift Knob | 19x9.5/19x10.5 Five Axis Design S5:F w/ 245/40/19 - 285/35/19 Hankook Ventus V12's
Daishi is offline   Reply With Quote