Nissan 370Z Forum - View Single Post - How close should Stillen CBE be to crossmember?

Lee123 · 06-11-2010, 06:03 PM

I had my Stillen CBE installed today. I watched the guy do the work and he followed the instructions including holding it up in the middle with a screw jack. He did a good job and the tips are straight and no further out than the original ones, but it still looks really close to the cross member to me. Maybe about 3/16" clearance. I don't like having it that close, but don't see much that can be done about it and it's not a problem as long as it doesn't get close enough to rattle as the rubber mounts get older. Is this the way these normally fit?

06-11-2010, 06:03 PM	#1 (permalink)
Lee123 Base Member Join Date: Apr 2010 Location: Phoenix Posts: 84 Drives: 2010 370Z Roadster Rep Power: 15	How close should Stillen CBE be to crossmember? I had my Stillen CBE installed today. I watched the guy do the work and he followed the instructions including holding it up in the middle with a screw jack. He did a good job and the tips are straight and no further out than the original ones, but it still looks really close to the cross member to me. Maybe about 3/16" clearance. I don't like having it that close, but don't see much that can be done about it and it's not a problem as long as it doesn't get close enough to rattle as the rubber mounts get older. Is this the way these normally fit?