Okay I'm all done. I'm mildly retarded so it took about an hour. The issues I had were that the Napa filter (made in china) had all four corners that were not flush so it was nearly impossible to close the filter door. I simply trimmed the corners with some sharp scissors and and then it closed fine. Once I looked in there with a flashlight it was obvious that the filter is held above the fan with those little feet in the front and back.
The only other issue I has was reattaching the little cable that puts tension on the glove box door. All done now with no broken parts!
Last edited by Pushing_Tin; 06-09-2010 at 05:48 PM.
|