Quote:
Originally Posted by weeeee
I just finished installing my oil cooler, but I'm a little concerned about the way I routed everything. Instead of mounting the cooler with both ports up, where flow won't matter, I had to mount it sideways (vertically vs. horizontally) with both ports pointing left due to space restrictions. My question is, on the Mocal sandwich plate, which fitting is flow "OUT" and flow "IN"? It's not marked and I think I may have switched the ports so that it flows against gravity.
|
It shouldn't really matter. There is more than enough pressure to flow just fine regardless of orientation..You're just installing a loop into the system..