Nissan 370Z Forum - View Single Post

tjlazer · 06-02-2010, 11:37 AM

You got the right cord. It's a very tight fit. Make sure the probes are flat and then slide them into the back of the wiring harness. You might have to move the wires around to make some room for the probe to slide in. It's a PITA. Might need some needle nose pliers also to push the probes in tight. Be careful you can break the probes easily. I found placing the probes in the top part of the harness worked better for me... Keep trying you'll get it.

06-02-2010, 11:37 AM	#58 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	You got the right cord. It's a very tight fit. Make sure the probes are flat and then slide them into the back of the wiring harness. You might have to move the wires around to make some room for the probe to slide in. It's a PITA. Might need some needle nose pliers also to push the probes in tight. Be careful you can break the probes easily. I found placing the probes in the top part of the harness worked better for me... Keep trying you'll get it. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV Last edited by tjlazer; 06-02-2010 at 11:40 AM.