Quote:
Originally Posted by 2fast4thelaw
Here are my recommendations to start with:
Set filter slope to 24db
Set crossover to 65 Hz
Turn off Infrasonic Filter (This switch is generally used for ported enclosures)
Turn off Bass EQ (At least at first)
Bass EQ Settings:
I would start the Center frequency at 40Hz, Any higher or you will get too much upper bass from this sub.
Also do NOT turn Boost beyond +10
I would set the Q to a wide setting to begin with (1.6 or 2.7)
Click this link below to view amplifier settings:
JL Audio: Products |
I agree with most except infrasonic... I would leave that "on" in this application. That will eliminate any frequency lower then 30 hz not go to the sub via amplifier. Human ear can not hear about 20Hz and down anyways and there are very afew recordings that will reproduce 25-30 hz, this allows the amp and subwoofer to work a lot more efficiently. Less heat on amp and less workout for the suboofer for a sound you will not be able to hear.