Nissan 370Z Forum - View Single Post

I Run L.A. · 05-23-2010, 05:51 PM

I installed H&R springs yesterday and figured i would post pics of its stance for anyone thinking of going this route can get an idea of how low it goes.

These were installed by Amplified Motorsports. Took the guy exactly 1 hour and 45 min tops. It was a smooth install.

Ride is very much like OEM, but it handles better. I am not using any spacers or camber arms for now. The front has about 1 finger and rear has 1 1/2 to 2 fingers tops. I dont think it will go any lower, springs should have settled by now. I did notice that the flaps now scrape alot so those might end up coming off. Overall im satisfied with the springs.

05-23-2010, 05:51 PM	#1 (permalink)
I Run L.A. Enthusiast Member Join Date: Mar 2009 Location: So Cal / SF Valley Posts: 329 Drives: 09 370Z Mag Blk Rep Power: 16	Dropped on H&R. PICS I installed H&R springs yesterday and figured i would post pics of its stance for anyone thinking of going this route can get an idea of how low it goes. These were installed by Amplified Motorsports. Took the guy exactly 1 hour and 45 min tops. It was a smooth install. Ride is very much like OEM, but it handles better. I am not using any spacers or camber arms for now. The front has about 1 finger and rear has 1 1/2 to 2 fingers tops. I dont think it will go any lower, springs should have settled by now. I did notice that the flaps now scrape alot so those might end up coming off. Overall im satisfied with the springs. __________________ 09 370Z Mag Blk, 6MT,Tour, Sprt Pkg, Nav