No need to answer the previous post. Just got my light working.
There is no need to remove the radio. Next to the shifter where the original poster recommended attaching the ground wire, there are a few wires wrapped in electrical tape. They run right along the inside of the center console piece on the DRIVER'S side. Push the clips back through the hole to free up the wires. Peel back the electrical tape and splice your power wire of the wiring harness into the YELLOW wire.
These wires run to the center console power outlet. Some previous posters were using this to power the light. Just wanted to share so that people don't pull off there center console because it is not needed.
|