Nissan 370Z Forum - View Single Post

marcussoori · 05-20-2010, 04:13 PM

Hi, guys. Ordered the H&R 15mm DRM front and 20mm DRS rear spacers from Stillen. Got them today, but the 15mm fronts aren't working! Checked that I have correctly labeled boxes.

Basically, the tech is telling me the wheel studs themselves (in addition to the supplied lug nuts) are unable to clear the relief well openings in the back of the wheel, which prevents the wheel from being flush mounted to the spacer. *Does this make sense? *Again, the stud is contacting the edge of the relief well.

What I'd like to know is: how many of you have successfully installed these with the 19", non-Anny. Rays wheels? Also, any advice?

I appreciate your assistance, guys!

05-20-2010, 04:13 PM	#1 (permalink)
marcussoori Enthusiast Member Join Date: Mar 2009 Location: USA Posts: 468 Drives: 09 370Z Red AT Sport Rep Power: 16	Help! Stillen H&R Spacer Problem! Hi, guys. Ordered the H&R 15mm DRM front and 20mm DRS rear spacers from Stillen. Got them today, but the 15mm fronts aren't working! Checked that I have correctly labeled boxes. Basically, the tech is telling me the wheel studs themselves (in addition to the supplied lug nuts) are unable to clear the relief well openings in the back of the wheel, which prevents the wheel from being flush mounted to the spacer. Does this make sense? Again, the stud is contacting the edge of the relief well. What I'd like to know is: how many of you have successfully installed these with the 19", non-Anny. Rays wheels? Also, any advice? I appreciate your assistance, guys! __________________ Stillen CBE & G3 LTIs, Motordyne M370, Berk HFCs, H&R 15/20mm spacers, CiNcity headlights, yellow OEM strut brace, Password: JDM CF engine bay parts, EVO-R CF front bumper parts, CF "Z" badge, VIS CF hood, Fujimura CF "diffuser", Show-N-Go plate frame, Katzkin red interior, interior CF, Pioneer BT-90 full system, Viper SmartStart