Red is for Toe and you should get the spec sheet from your alignment. Its too difficult to determind w/o knowing how much of a drop from stock to advise if you need the Toe bolt installed or not.
I know that 1.0'' drop will NOT require the Toe bolt and you will be able to adjust with the stock Toe bolt to keep within OEM spec.
I have heard of peeps installing the Toe bolt that comes with the SPC Rear Camber Kit and NOT hogging out the hole. But again it all depends on how much you are dropped and the readings from your alignment print out sheet.
As far as what benefits are gained from installing the SPC Toe bolt on a 1.0" drop when you really only need to keep the stock Toe bolt in....I really do not know. Funny thing is, my installer said this same thing just this afternoon, I will let you know after this Sat when I get a lot of my suspension mods installed. weeee!
|