Nissan 370Z Forum - View Single Post - RPM cut at 2500??? What's wrong with this??

1slow370 · 05-08-2010, 06:52 PM

my car did this once as well it was throwing cawshaft position sensor over adv. errors like like crazy for both sides, shut the car off for ten turned it back on and no problems since my guess is the ecu may be a little too overprotective or there was some kind of interference and it just took a while for it to figure it all out that it was safe again.

Well my RPM cut came back wouldn't go over 3600 and tada both my cam position sensors are faulty. i only have resistance across 2 of the three pins in each sensor and the manual says there should be resistance across any combination of pins

anybody want to take bets on whether they void my warranty or not?

05-08-2010, 06:52 PM	#3 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	my car did this once as well it was throwing cawshaft position sensor over adv. errors like like crazy for both sides, shut the car off for ten turned it back on and no problems since my guess is the ecu may be a little too overprotective or there was some kind of interference and it just took a while for it to figure it all out that it was safe again. Well my RPM cut came back wouldn't go over 3600 and tada both my cam position sensors are faulty. i only have resistance across 2 of the three pins in each sensor and the manual says there should be resistance across any combination of pins anybody want to take bets on whether they void my warranty or not? __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 05-09-2010 at 07:35 PM.