completed stillen oil cooler install (standard model)- Instruction real bad so thanks MBobo your DIY was real helpful- I followed same route and also ended up putting the long SS line on pass side.
Two mods I did-
1. relocated the PS cooler to the drivers side not behind oil cooler- noticed when tracked PS got real hot so did not think good idea to put directly behind oil cooler- easy to move just bought some 3/8 hose.
2. Added a bracket to better route the SS lines from behind the cooler over to the wheel area- simple "L" bracket but it really worked out well- does not hold hose tight but just gives it guide- pics below
|