Quote:
Originally Posted by Billarf
Tony, It would be appreciated if you took the time to post here what EXACTLY is involved in "It states in our instructions that you need to make sure the flanges on the back of the X Pipe are level." From many posts here it is clear that most guys here doing the install have not aligned them and have an issue with one rear muffler slightly lower then the other. Again, Tony....... PLEASE take time to explain here ASAP. Thanks!
|
I have installed probably 30+ systems at my shop and every one has left aligned. It is real simple, hold a level on the back of the X Pipe under the rear 3 bolt flanges. Hold it level while a second person tighten downs the exhaust system starting from the front to the back. Then install the rear 2 mufflers sections. When all of the hardware is in they will still have some rotation to them. This is what makes the cans go up and down. As the can rotate inward, it will go up. As the can gets rotated out, it will go down. Once you get the bottom front of the cans level, then shim the tip down if you have to. Most of the time we do not have to add washers to bring a tip down. All of this is in the installation instructions that I send with the CBE...
Tony