1. Use the same instructions for removing the dash panel to gain access to the key fob security assembly. There are 3 screws to remove the VDC switch bracket from the dash. The uppermost screw should be removed from behind the dash (easiest access) using a short Philips head screwdriver. The two bottom screws can be removed from underneath the steering column.
2. Pop the switch off the bracket. Then carefully pry the sides of the switch to release the connector end. Circled in red is the 0805 LED to change.
3. Completed modification. Notice the switch already has some yellow tint, so LED colors other than white should show up fine.
