Well I did my oil cooler installation today...this DIY by Vipor was invaluable. A few comments about what I did different and the results: I used a Setrab series 6, 25 row and had no issues with contact at the top and consequently did not have to modify the cooler at all. I went with Aeroquip stainless steel AQP hose instead of the Socketless. I did find that trying to go straight off the Mocal oil sandwich plate and thereby routing the hoses above the sway bar was not possible so I went with 90 deg Aeroquip fittings. The stainless AQP hose does cause contact with the removable underbody protector panel but this is quite mild and does not interfere with it's placement. Overall a relatively easy DIY make significantly easier because of the work by Vipor.
|