View Single Post
Old 04-15-2010, 05:40 PM   #1 (permalink)
LOU@AMPLIFIED
Vendorship temporary revoked due to payment issue
 
Join Date: Nov 2008
Location: so cal
Posts: 982
Drives: 08 g37/09 370z
Rep Power: 0
LOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond reputeLOU@AMPLIFIED has a reputation beyond repute
Send a message via AIM to LOU@AMPLIFIED
Default KINETIX RACING FRONT and REAR camber kits from AMPLIFIED MOTORSPORT

Kinetix racing just released a few new suspension parts for the G37 and 370Z.

RACE SPEC FRONT CAMBER ARMS




Front Upper A-Arms with Camber Adjust-ability for the 370Z and G37 Complete upper control arm replacement allowing positive and negative camber adjustment of the front wheels. These arms will allow you to either add positive camber to your wheels (EXTEND tire life) or to add negative camber (increase handling). OUR ARMS OFFER THE MOST POSITIVE ADJUST-ABILITY OF ANY ARM ON THE MARKET (longer tire life!) LIFETIME WARRANTY !!! The front suspension from the factory allows zero camber adjust-ability which can become a problem especially when lowering your car. Race enthusiasts also wish to add more negative camber to increase their handling without having to "slam" their car to achieve the desired camber. These arms will allow 1.5 degrees of positive camber, and 1.5 degrees of negative camber from the factory settings. So if your car is lowered 1.5" and the front camber is sitting at 2 degrees negative camber, these arms will allow you to bring them back out to .5 degrees negative camber. ** Will fit the following vehicles: * 07-08 Infiniti G35 Sedan * 08+ Infiniti FX 35 * 08+ Infiniti G37 coupe * 09+ Infiniti G37 sedan * 09+ Nissan 370z These arms are completely TIG welded and offer a huge upgrade in strength over the factory arms. They use ENERGY SUSPENSION polyurethane bushings for increased responsiveness over the factory rubber bushings. They also use a high quality 3-piece Heim ball joint protected by a polyurethane red dust bootie. These Heim joints offer the best in suspension responsiveness and smooth operation. These Heim joints are also highly serviceable and do not require any special tools to remove. The have Teflon coatings inside for "chatter" free operation for years. We have also included grease fittings for even easier serviceability.

RACE SPEC REAR CAMBER ARMS



Rear camber arms for 370Z and G37 *** LIFETIME WARRANTY !!! These adjustable arms will allow a full range of camber adjustment for your rear wheels. Also featuring upgraded ENERGY SUSPENSION polyurethane bushings, these arms are considerably stronger and stiffer than the factory arms. Vehicle pplications: * 07-08 Infiniti G35 Sedan * 08+ Infiniti FX 35 * 08+ Infiniti G37 coupe * 09+ Infiniti G37 sedan * 09+ Nissan 370z Fabricated out of high strength alloy steel, with a stainless center turnbuckle for increased stiffness and strength. Center turnbuckle has fine threads for precise adjust-ability. Are produced in house and are precision TIG welded.

RACE SPEC REAR TRACTION ARMS



Rear adjustable traction arms for the 370Z and G37 (2dr and 4dr) *** LIFETIME WARRANTY !!! These adjustable arms allow fine tuning of the rear suspension and allow slight adjustment of rear wheel toe. When lowering your car 1.5"-2" and adjusting rear camber back to spec, your toe will need to be pulled back into spec as well, which can be achieved with these arms. They also feature high quality ENERGY SUSPENSION polyurethane bushings for increased handling. The increased stiffness of the arm and upgraded bushing help to eliminate "wheel hop". Vehicle applications: * 07-08 G35 Sedan * 08+ G37 Sedan and Coupe * 09+ 370z Fabricated out of high strength alloy steel, with a stainless center turnbuckle for increased stiffness and strength. Center turnbuckle has fine threads for precise adjust-ability. Arms are produced in house and are precision TIG welded. ** For cars lowered more than 2", you may not be able to pull your toe back into spec as well as your camber. Please email us for a suggested fix that will allow camber/toe to be pulled back into spec with minor modification to the vehicle ** ** we STRONGLY suggest getting your alignment done by a professional with a computer** **These arms ship 3-7 business days after order placement, thanks


Kits can be bought individually or as a set. Additional discount applies for package deals. PM ME FOR PRICING

THANKS
lou@amplified
LOU@AMPLIFIED is offline