Quote:
Originally Posted by travisjb
good explanation chris... i got it working last night by simply wiring 2-5 to a switch and 3-4 to a switch... interestingly, they both seem to do the same thing = low beams... you run either or both and LOW BEAMS... no idea why that is...
By the way, the numbering on this matrix is different than the pin numbering so for anyone using this chart make certain to look up connector number "m33" for an explanation of how the I/O maps to the pins
Also, I didn't use diodes... is that bad?
|
The diodes are a safety to ensure that current only moves in the one designated direction. I would add them to prevent the chance of damaging the BCM. Just make sure it points from input to output, i.e. stripe side facing output.