Quote:
Originally Posted by Smallywood
Anyone running all 4 items? I hear that if you run all 4 parts you will lean the car out too much. Any feedback from members running or that have tried this set-up?
|
I have done extensive dyno testing and I can tell you with our headers and CBE the car does not run too lean. However, when you throw Stillen Gen III intakes into the equation it will need a re tune. The A/F will be way out of whack and in the mid to high 13 ratio!
Just to prove my point about not being too lean look at the A/F dyno chart here. This dyno chart is from my LTH thread. You can see the comparison between our HFC/CBE vs. our LTH's/CBE:
One more thing I would like to add. From just a performance standpoint, I feel that any aftermarket intake for this car is a WASTE of money.
From all of the dyno testing we have done, the gains have been very minimal and in most cases next to none! I have dyno charts that shows a car losing mid range power and some torque in trade of 3 horsepower up top.
For $500+ and the time or money to install it, I feel that you can spend your money elsewhere.
Buy the K&N drop ins and call it a day!
If anyone has any questions comments or concerns
PLEASE do not hesitate to ask. I can show dyno charts with many different combinations. What I can tell you is that the stock intakes do the job just fine... even with long tube headers installed.
Thank you,
Tony