Quote:
Originally Posted by FuszNissan
Damn that sticker is big!
|
Haha! Like I said, I've been very pleased with the help you guys are providing! Will leave driver's door as is, of course. Passenger door and dash are temporary - just wanted to see how the dash decal showed up on camera... Looks pretty good!
Quote:
Originally Posted by Kyle@STILLEN
Travis- you have probably shared all of this information but this thread is very long,
What are those scoops for in the B-pillars? Where are you directing the air to?
I saw that you are going to go with some Moton's later on. Hit me up when you're ready and we'll get you some Penske's! Penske's are by far the best shock in the world. You'll love them!
|
Did you see the diff cooler setup on Sharif's 370z race car? I'm doing something very similar... Going to delete the rear license plate area, screen it off with black mesh stainless, then setup a cooling box to which I will direct air from the side scoops. It is truly overkill for airflow, but I'm hoping there is also a benefit of flowing air out the center rear in order to draw air out from under the car etc. Lots of CFD and wind tunnel testing went into this theory!
Quote:
Originally Posted by Sharif@Forged
He's probably going JRZ or else I will fly down there and personal kick him in the nuts.
|
Re coilovers... I'm definitely open to input, including any risk of damage to my nads from picking one brand or another... For now, I intend to drive the crap out of the BC's and see how they hold up... prob later this year, I'll be looking at an upgrade
Quote:
Originally Posted by Sharif@Forged
Yeah...a little too big! Give Forged some additional love Trav!
|
Sticker envy? lol
Quote:
Originally Posted by Sharif@Forged
Travis what is your current camber setup? Slight hotter inside front tire temp is actually very typical and desirable. If you are happy with the turn in and front end feel I would not reduce camber. We run -3.5 front on our 370z and -2.5 rear. Hope that helps.
|
Thanks, good feedback. Unfortunately, I think the turn in is sluggish... Could have something to do with the big ars tires I'm running up front (285s) or maybe we're running too much caster??? we advanced the caster angle to nearly +6