We're finalizing a few things right now. During our testing of the fascia we found that the top mounting surface was a little thin and a little weak. We used the factory fascia for this section and it might have been a bit too thin. So, the craftsmen in the modeling shop worked on that on Friday and again this morning. We should know more this afternoon. I was hoping to have everyone wrapped up and shipped on Friday but as everyone has said, we would all rather wait until everything is perfect before we ship them out.
We're a few pages deep now so I though it would be a good time to recap some of the integrated features of the fascia.
1) Additional cooling- We opened up the main center opening to allow for a lot more air flow.
2) Even more airflow- We plan on offering an additional oil cooler which can be mounted behind the vent on the driver's side. For the guys who purchased the street cooler first, then the motorsport cooler...That street cooler fits perfectly in the side opening so you can now run both. This is what we plan on doing for our car.
3) Still more airflow- We have incorporated a small vent underneath the top section of the fascia. This small vent will help direct air to the Gen. 3's, supercharger intakes, and intercooler.
4) Brake ducts- We will be building some modular brake ducts for people who want to either keep the fang look or for the guy who just wants brake ducting. Either way, these will be 100% functional and work perfectly for both people.
5) Great looks- We wanted to keep this looking good but functionality was definitely the primary focus.
|