Quote:
Originally Posted by MightyBobo
Well, right. Basically everyone peaks HP somewhere around 7K and it levels off. Mine was supposedly at 7.5K and still rising, and I barely hit 275. Dynojet only registered 205ish torque or so. So, something didnt seem right. Never did get a response from Altered Atmosphere on this...
|
HP is calculated (continuously) as Torque * RPM / 5252.
So if your peak torque measurement is low then there should also be a dip in the HP curve between 4-5k rpm. The torque plot and HP plot always cross over at 5252 rpm provided they are plotted on the same scale.