Quote:
Originally Posted by jtown82
only thing i dont like is it looks like your sealing the ducting to the air box? making it the only way of air getting in. wont that basically make it have to suck through a straw to get air at idle and low speeds. though that doesnt seem like much but im pretty sure your hurting the performance through a good bit of the launching untill certain speeds are hit. ive seen setups like this and watched cars lose power because of that until certain speeds are pushing enough air in. have you actually had the car on a dyno with that setup? cool air is good an all. but it the engine is actually having to struggle to get the air its not helping. you need something to actually monitor air CFMs and see if its actually helping or hurting. but i could be wrong. .
|
My airboxes are not connected/sealed to the inlets. Even if they were, the flanges are no smaller than the actual pass through ports to the OEM boxes.
My experiments on another similar design (sealed) on another car showed that the flow up dual 2.5" hoses was enough to pretty much eliminate any restriction at the airbox outlet, and actually show some positive pressure on a Magnehelic gauge..
