it was simple
thing you will need.....
3m Ni-Doc carbon fiber vinyl.....got it on ebay...make sure its 3m.....
new razor knife.....
heat gun...only use the low setting....
flat head screwdriver thin...
blue painters tape.....
remove window switch plate.....
place blue painters tape on both side of seam where the two pieces come together on the door....(bottom of plate )
take screw driver and insert it between the two pieces of tape a slowly pry the plate out of door socket
un plug wire harness....make sure door is closed b4 u remove the wire harness...
clean entire switch plate.....
take the vinyl and wrap the plate....take your time....make sure everything is centered so the weave is strait when done....
trim out the shape of the plate leave yourself a little material so u can wrap around the edge....trim off excess....
take heat gun on low and shrink the edge and smooth out any area around the top and side....
take heat gun and and heat up the vinyl on top of switches trim out and the switch......
its that easy sorry no other pics for ya...
good luck
__________________
what happens when you drive a GT3 and the economy tanks you buy a 370z sport touring
|