Quote:
Originally Posted by 370zForever
Modshack, is there anyway to do your set up with the G3 Intake cause the intakes run right through the place where you put the hoses?
|
Sure...Just route the hoses toward the center where the G3 filters reside. YOu can use flanges there to hold the hoses..Attach to the bumper with a simple "L" bracket and point at the filters..
Quote:
Originally Posted by Zsteve
correct and the tubes are being directly aimed at the opening to the stock air boxes, it might even hook right to it, Im not sure I am waiting from Modshack to verify this. .
|
If you put the flanges on you are creating a direct feed from the Fang area. Seems the best way, but others have just poked the hose in there.. Since the Airboxes are sealed to this pass through it should work very well, but I suspect that 6-10 degrees over ambient is about the best we'll get since the MAF based temp sensors are actually in the engine bay..