Quote:
Originally Posted by Modshack
Yup..What you are seeing is very close to the results I got. My intakes are not sealed to the Fang vent tubes, but IAT's cool down much faster from underhood soak and generally run 6-10 degrees above ambient. If I were to seal the intakes to the inlets (or had stock air boxes) I suspect that number would be even lower.
With the vents, it's amazing to see how 150 degree+ temps dissipate so quickly after a red light heat soak...!
Not too many guys here have the abilty to measure IAT's so I don't suspect you'll get much response.
Cooler is better...
DIY on the vents is here: http://www.the370z.com/diy-section-d...ur-airbox.html
|
Modshack, is there anyway to do your set up with the G3 Intake cause the intakes run right through the place where you put the hoses?