View Single Post
Old 02-22-2010, 11:34 PM   #772 (permalink)
kdoske
Track Member
 
kdoske's Avatar
 
Join Date: Jul 2009
Location: Louisiana
Posts: 541
Drives: 800whp Unicorn FI Z
Rep Power: 17
kdoske is on a distinguished road
Default

Quote:
Originally Posted by travisjb View Post
you're prob right... more than happy to skip the fans!
just use these $25.00 inline 15amp thermostats. When 180F is reached it acts as an inline switch and turns it on the device(s). Can't exceed 15amps with the model posted.

Derale In-Line Fan Control Thermostat with -6 AN Fittings - 180 Degrees Derale Radiator Fans D13021



You could have three options.

1. connect the thermostat to your pumps and have them shut the pumps on and off when 180 degrees is reached and don't use any fans.

2. have the pumps running all the time and connect the thermostat only to the fans.

3. connect everything to the thermostat.

Personally I would go option 1.


__________________________________________________ _____________

As for the pumps I would go with Mocal Oil pumps. There are two main ones, one is rated at 300F and the other 350. When it comes to oil pumps the higher the temp rating the longer pump life you are gonna have.

300F oil Mocal Oil Pump:
http://www.racerpartswholesale.com/p...al_Cooler_Pump

- flow rate 1.0- 2.0 GPM and up to 54 PSI
- weight: 3.5 lbs
- 3/8" NPT fittings
- 8-amp current draw



350F oil Mocal Oil Pump: (probably over kill)
http://www.racerpartswholesale.com/p...al_Cooler_Pump

- 3 GPM @ 60+ psi
- 350f temp rating
- self-priming
- quiet low vibration operation
- 10,000 hour rated bearings & motor brushes
- hardened bronze pump (spur) gear rotors
- black anodized aluminum heatsink
- nickel plated pump head
- stainless pump head fasteners
- 3/8" NPT inlet/outlet
- high temperature internal wiring
- 3 foot wiring lead with (supplied) weatherproof connectors
- rubber-isolated mounting bracket and feet
- dimensions 6.2" x 4.1" x 4.0"

Last edited by kdoske; 02-22-2010 at 11:42 PM.
kdoske is offline   Reply With Quote