View Single Post
Old 02-20-2010, 05:14 PM   #762 (permalink)
travisjb
A True Z Fanatic
 
travisjb's Avatar
 
Join Date: Jan 2009
Location: GSO
Posts: 2,803
Drives: VIR
Rep Power: 188
travisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond reputetravisjb has a reputation beyond repute
Default

Initial shopping list for diff/trans cooling setup... I'd love to get everyone's feedback on this


1. Two (2) of these pumps - they are on sale!

Tilton Engineering 40-524 - Tilton Transmission and/or Differential Oil Cooler Pumps - Overview - SummitRacing.com Brand Tilton Engineering 40-524 Tilton Transmission and/or Differential Oil Cooler Flow Rate @ 12 Volts (gpm) 1-2 GPM Working Pressure (psi) 60 Temperature Range (degrees F) 0 to 265 3/8 inch NPT inlet and outlet size. These Tilton transmission/differential oil cooler pumps are positive displacement-type pumps that produce output directly proportional to motor speed. They're lightweight, self-priming pumps that may be mounted in any position up to several feet away from the tank.

2. Two (2) of these fan packs

oil cooler: transmission cooler - remote thermostat - car thermostat - transmission oil cooler - engine cooler -LivermorePerformance.com Setrab Fan Pack Coolers FP119M22I $264 Series 1, 19 row with 12 volt fan diff./gb/small hp engine pressure 2.3/2.7 btu/hr 9.5k-13.5k diff pressure change / pressure <0.5 8-1/4 dimensions 7x6x6

3. Some air ducting to connect side scoops to custom cooler box
3620-Diameter-Length Neoprene Air Duct Hose, Black


4. Two (2) air ducts to diffuse the air into the cooler box

Air Inlet, Small Bumper Mount (1 Outlet) Computer Aided Design (CAD) and wind tunnel testing have been combined to produce these ducts. Attention to detail results in maximum air flow with minimal drag. They are molded from tough, high-impact black plastic. An integrally molded flange (approximately .75" wide on most ducts) makes them easy to install in body panels or air dams. The outlet nipple is sized to fit our 3" air ducting hose. Approximately 9.5" x 5" including flange.

5. A Sheet of Stainless Mesh to replace the rear valence cut out... 10 openings per inch or 6 ???

Pegasus - Medium Mesh Stainless, #6 x .035 Wire (6 openings per inch) Medium Mesh Stainless, #6 x .035 Wire (6 openings per inch) Our Stainless Wire Mesh can be fabricated into almost any shape using standard sheet metal techniques. The #6 mesh size is contructed of 0.035" diameter wire with 0.132" openings, making it great for protecting oil coolers and radiators from medium objects and debris down to 0.132" diameter. To protect against larger, heavier objects as well, combine a layer of this mesh with a layer of our Coarse Mesh #4 (part #3642-Size).

Would also need a bunch of fittings and lines

Thoughts ?
__________________
2009 370Z #104
*For Sale*
travisjb is offline   Reply With Quote