evo-r cf middle bumper cover quick tip......
 quick tip for install of evo-r carbon fiber middle bumper cover.......cars equiped with sport touring packages
If you have been reading these post, there seems to be a lot of talk about having to take off your spoiler....This is not true....grab your drummel tool with a cut off wheel some painters tape and a pen..oh ya a ruler and some type of automotive glue
first take your cf part and wrap with painters tape the bottom piece of cover(the part where are the cf comes together ..the piece at the bottom of bumper )
now take ruler and measure off aprox 1.25inches and draw a line using the edge of bumper cover as 0(check your actual distance)
cut that line with drummel tool keep the tape wet so the dust doesn't go all over also cover your mouth and nose(cf dust is toxic and cause cancer in dust forum
now that its cut don't rush to put the
fang on...cover the bottom inner edge of your stock fang with a little tape both sides this will keep fang cover from scratching the hell out of your paint
get some clear nail polish and coat the edge you just cut this will keep moisture out so the cf doesn't start to separate
ok take your glue and put just a few dabs on the inside of cover stay away from the edges (so the glue doesn't leak out of seems)
slide cover on tape it in place with blue painters tape and leave alone so glue can set
the cover is so tight no rivet or bolts will not be necessary
enjoy i will post pics 2morrow when i remove tape
__________________
what happens when you drive a GT3 and the economy tanks you buy a 370z sport touring
Last edited by k's 370z; 03-09-2010 at 04:27 PM.
Reason: add picture
|