Thanks for the info, very helpful.
Is the Z1 connector about 2 to 3 inches longer than the OEM one? Did it take long to bleed the system afterward?
Quote:
Originally Posted by 40 to 332
I installed the Z1 connector a couple of weeks ago. It fits fine. No need to cut the hoses. I'd recommend using spring clamps versus the worm clamps. I also replaced the small section of heater hose that runs from the connector to the heater core. As reported by others, the hardest part of the job was removing the OEM spring clamps. I eventually resorted to using a pair of ratcheting Mayhem hose clamp pliers. They worked like a charm. Saved a lot of grief. Trust this helps.
|