Looks like they used a ton of grease on input shaft that has flung out on pressure plate. (the rub ring)
Also, the damge to clutch disk hub is probably from them ramming the transmission in not propertly aligned to engine, or they didnt use the clutch alignment tool properly in first place.
Don't go back there. I did my transmission twice on my back and I never forgot the tow top bolts. Yes, hard to get at, but not impossible. A shop with a hoist it's trivial.
Those two bolts would'nt casue misalingment unless the rest of the mount bolts were loose.
Dont go back there again.
__________________
“Action without vision is a nightmare.”
|