Quote:
Originally Posted by Smokey Nagata
My Torque Solution Billet Aluminum Transmission Mount with 75A Durometer Urethane took some time to break in as upon installation there was heavy vibration throughout the rev-range. After about a month or so the vibration dampened and the NVH was much improved, not stock like but better. However the main holding bolt ended up backing out unknowingly after about a year and caused weird noises upon start up and cold operation that took me a while to track down. I ended up swapping back to the stock piece, repaired the TS mount & lock tightened the main bolt and sold it.
|
Thats a good point. It is still fairly new. (the TM) Maybe I'll give it some time.
I think it is the gear backlash that I feel and hear upon releasing throttle and coasting in gear.
Interesting about the Torque solution mount. When I got mine that center bolt was almost back right out and loose.
I e-mailed TS and asked about the tourque of that screw and it was only 80 in.lb. I did apply some blue locktite before I torqued it. Otherwise nothing holding it in positively.
zz