I finally got around to installing brake cooling ducts. I was pondering a super detailed job, but in the end I settled with a pretty simple solution. I just routed two pipes (not too large, around 2,5" diameter) right next to the splash tray and over the sway bar towards the middle of the wheel. It's not super accurate and it's probably not as efficient as it could be, but I'm sure it will be better than stock.
I also cut the entrance of the tubes with a long V on the bottom side, so it's a wider entrance area but also so that rocks and trash wouldn't get scooped up that easily. It's not much, but for now it will be enough.
|