I checked all the service manuals also and that’s why I was confused. I found it though. I used a multi meter to check continuity at the IPDM wire for the fuel pump relay (red wire with silver stripes on it) and used the other lead to check each pin one by one. The spot on the black ECM connector is terminal 23. If anybody is doing the same job and wiring in a kill switch, if you find terminal 22 blank on the black connector (the one closest to the engine bay) then try terminal 23 with a multi meter on the continuity setting where you can hear the beep, with the IPDM terminal 77 wire. Should be the red wire with 2 silver marks every so often. Hope this helps.
|