Quote:
Originally Posted by markesc
How much 3m tape did you use? Locations? I'm tempted to get one of these - but I'm worried it's going to end up on the road/lost!
Did you have to remove the 3rd brake light to install?
Also thinking one could simply drill holes on the bottom and use black hardware for a low profile look
|
For the tape, you can determine where to place it based on the contours. It also comes with 6 self tapping screws and silicone glue. I didn’t use any glue. For the screws, place one screw into the bumper plastic above each exhaust tip. You need to move the exhaust out of the way to accomplish that :-) Then 2 screws at the end and underside of the bumper. It also comes with a bolt which replaces the clip in the rear fog light. There’s a YouTube video that helps. Here’s the link
https://youtu.be/7bDCMqj2i3A?si=U_T5cE5hfDK4c5EK
It’s actually pretty easy. Just take your time and be careful pre-drilling the holes. Connect the diffuser at the center fog light with the bolt. That centers and secures it enough to then flex it into place for the screws at each end and above the exhaust tips. As you can see in my pic I shared above, you really can’t notice the screws unless one looks closely.