Day 2, dash been outside for 24+ hours, another 90+F full sun clear sky. In the picture, right hand side is still dry to the touch, and noticeably more matted. Second picture shows surface temp. The middle line was where I had masking tape on (fell off when dash turned melted under the sun).
I’m leave it out there for more time to see if it’ll fail at some point.
I’m also going to try the same application technique using 303, to see if that will work.
__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield
|