Nissan 370Z Forum - View Single Post - Fuel Line Setup for Radium Surge Tank and 10 PSI + Ethanol (just FYI stuff)

DarkJak · 07-13-2023, 10:50 PM

Yup, I'm running OEM rails. They do seem to have some restriction still, and there is still evidence some pressure drop looking to data logs but worlds better than before.

And yup phunk owns CJM! If I were doing everything clean slate, I'd just do his kits for everything. I just already have the Radium setup from when I was NA.

I ended up bumping the regulator pressure up 2 PSI to compensate what pressure drop is left.

If you're running into this issue, then at the bare minimum upgrade to as much 8AN line or 6AN as possible.

07-13-2023, 10:50 PM	#4 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	Yup, I'm running OEM rails. They do seem to have some restriction still, and there is still evidence some pressure drop looking to data logs but worlds better than before. And yup phunk owns CJM! If I were doing everything clean slate, I'd just do his kits for everything. I just already have the Radium setup from when I was NA. I ended up bumping the regulator pressure up 2 PSI to compensate what pressure drop is left. If you're running into this issue, then at the bare minimum upgrade to as much 8AN line or 6AN as possible. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668