Bringing this thread back from the dead as I have a question about the part number 78100H that was referenced by a previous post in this thread. I had a body shop replace an A pillar cover from some attempted theft damage and long story short, they half assed the repair and broke all the B pillar cover clips and just used double sided tape to stick the B pillar cover back on. I ordered a new cover and all the associated clips and grommets that are supposed to secure it to the body including the referenced 78100H. Bottom clips went in just fine, but when it came to the top one it seems to be too small for the hole even with the 78100H grommet and will not clip into the body, I’ve tried double checking diagrams and part numbers and everything is correct according to what Nissan lists, but it seems like I am missing something. The only clue I have to go on is that there is what looks like a circle of old adhesive around the top hole for the B pillar cover and I am wondering if there is a replacement for that or if I should just get some black rtv and just use that to stick this grommet in place. Any input would be appreciated in helping me out with this and thanks in advance
|