gbrettin

I checked on my car's wiring progress yesterday and it was more of a regression than anything. I let the shop owner of Auto Dynamix use the components of my 370z to diagnose the white 370z at the shop, which had REALLY bad wiring issues. I'm looking at it as paying it forward to the shop for helping me out with shop space; but, It's coming to a head where I need my car buttoned up now. I talked to them, they are on the same page now. I hope.

Now for my mold... I found a tiny soft spot on the face so I went after potential soft spots drilling additional holes and the soft spot. There would have been a spec on the carbon fiber face that would have bothered me. There's no better time than now to get it right. I laid down a real sloppy layer of bondo, it didn't go great because I was pretty salty about having to do it in the first place.


Today at lunch... I went for redemption. The bottom side of the mold was also cut down to make life easier laying carbon fiber. knocked down the crap layer of bondo, air sanded the ends somewhat flat and laid another thing of bondo so I can sand some more after work. I am less salty today.