Nissan 370Z Forum - View Single Post

Averying · 10-20-2022, 08:07 PM

Might be an issue that you reused the OEM screws. I believe the problem with OEM screws is that they can’t be torqued properly due to the drive type. the reputable aftermarket solutions use allen heads so you can better torque them down. Did you follow the torque specs on the screws during reassembly?

Also, u mention u added silicon to the gaskets and screws. For the gaskets I understand what u mean, although I’m not sure that this is recommended. However, for the screws I’m concerned as to why you added silicon. Was it added to the threads of the screws?

Sent from my iPhone using Tapatalk

10-20-2022, 08:07 PM	#2 (permalink)
Averying Enthusiast Member Join Date: May 2018 Location: Rhode Island Posts: 478 Drives: '09 370Z, '03 G35 Rep Power: 14419	P0011 2 years after gallery gaskets Might be an issue that you reused the OEM screws. I believe the problem with OEM screws is that they can’t be torqued properly due to the drive type. the reputable aftermarket solutions use allen heads so you can better torque them down. Did you follow the torque specs on the screws during reassembly? Also, u mention u added silicon to the gaskets and screws. For the gaskets I understand what u mean, although I’m not sure that this is recommended. However, for the screws I’m concerned as to why you added silicon. Was it added to the threads of the screws? Sent from my iPhone using Tapatalk __________________ 2009 Sport Touring \| Platinum Graphite \| GTM Stage 1 Supercharger \| BC BR Coilovers \| Hotchkis Swaybar \| Z1 FUCAs \| AME TM-02 Wheels \| Z1 2-piece Front Rotors \| Z1 Clutch & Flywheel \| Invidia Gemini Catback \| GTM Resonated Test Pipes