Check for deformation or damage of drive plate (A/T models) or flywheel (M/T models).
CAUTION:
• Never disassemble drive plate (A/T models) or flywheel (M/T models).
• Never place drive plate (A/T models) or flywheel (M/T models) with signal plate facing down.
• When handling signal plate, take care not to damage or scratch it.
• Handle signal plate in a manner that prevents it from becoming magnetized.
Flywheel (M/T models)
• Ensure the dowel pin (1) is installed in the crankshaft.
4 : Rear oil seal
• When installing flywheel (3) to crankshaft (2), be sure to correctly
align
crankshaft
side dowel
pin and flywheel
side dowel
pin
hole (A).
It's been done incorrectly before!
|