Quote:
Originally Posted by tiller
I was running vp x85, car is tuned by seb, no Dyno sheets to prove it but roughly 500wheel torque, the bent rod could have possibly been driver error as well, I hung out near the redline a couple times during some difficult 3-4 shifts , but the rods are the weak point on a stock motor so it wasn’t bound to happen eventually.
|
How much PSI were you running. I just got mine tuned last week, I had the 47mm turbos and was making 444 ft-lbs and 544 hp at 9psi. I was using the 8psi springs in the wastegates so room for more boost, but don’t want to break the motor.
Sent from my iPhone using Tapatalk